Sustainability is key for the almond industry. Minturn Huller Co-Op, an almond hulling and shelling facility in Merced County, California, decided solar was the way to go to reduce energy costs while protecting the environment.

Case Study: Minturn Huller Co-Op Goes Nuts for Solar
Case Study: Minturn Huller Co-Op Goes Nuts for Solar

Contributed by | SMA America

Reprinted with permission from SMA Inverted:

However, what do you do when the amount of energy production needed would require an array that is too large to fit on your existing building?

Well, Pickett Solar had the perfect answer for their client’s situation. They designed a 1.55 MW solar system consisting of a rooftop array and a solar support architecture, which not only provides structure for solar modules but also provides shade for their almond hulling trucks and trailers.

With this solar arrangement, comprising 4,552 Canadian Solar modules and 45 SMA Sunny Tripower inverters, Minturn Huller Co-Op will produce approximately 2,000,000kWH annually and get closer to achieving their sustainability goals.

“We are always proud to partner with SMA because of the top quality of product, proven track record and customer service that is second to none!” said Mike Williams, project manager at Pickett Solar.

 

The content & opinions in this article are the author’s and do not necessarily represent the views of AltEnergyMag

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

Vecoplan - Planning and implementation of complete processing plants in refuse derived fuel production

Vecoplan - Planning and implementation of complete processing plants in refuse derived fuel production

In order to reduce the costs involved in the energy-intensive production of cement, many manufacturers are turning to refuse-derived fuels (RDF), considerably reducing the proportion of expensive primary fuels they would normally use. Solid fuels are being increasingly used - these might be used tyres, waste wood or mixtures of plastics, paper, composite materials and textiles. Vecoplan provides operators of cement plants with proven and robust components for conveying the material and separating iron and impurities, efficient receiving stations, storage systems and, of course, efficient shredders for an output in various qualities.