NREL Technique Leads to Improved Perovskite Solar Cells
Scientists at the Energy Department's National Renewable Energy Laboratory (NREL), in collaboration with researchers at Shanghai Jiao Tong University (SJTU), devised a method to improve perovskite solar cells, making them more efficient and reliable with higher reproducibility.
Using Particle Accelerator Technology to Manufacture Solar Cells
This technique is projected to reduce solar panel manufacturing costs by upwards of 60% compared to industry standards, while making them 25% more efficient, and resulting in a very cost-effective source of energy.
Can We Place Solar Panels in Space?
Since clouds, atmosphere and nighttime are absent in space, satellite-based solar panels would be able to capture and transmit substantially more energy than terrestrial solar panels.
UH Researchers Discover Key Mechanism for Producing Solar Cells
Better Understanding of Perovskite Solar Cells Could Boost Widespread Use
Flipping crystals improves solar-cell performance
Perovskite research team spin-casts crystals for efficient and resilient optoelectronic devices
IKEA of energy delivers clean, green solar power-plant in a box
Richard Kemeny for New Scientist: Here’s a bright idea for flat-packing. A German start-up has figured out how to cram an entire solar power plant into a shipping container. It has sent its first kits to off-grid villages in Africa, where they provide a new source of clean, affordable electricity after just two hours of assembly.
More than 620 million people in sub-Saharan Africa have no access to electricity, a situation that can keep people in poverty. And population growth means this number is rising. Those with access tend to rely on inefficient diesel generators, chugging along with crippling financial and environmental costs.
Despite that, diesel is standard for off-grid energy. “If there’s no diesel, there’s no electricity”, says Rolf Kersten of the start-up, Africa GreenTec in Hainburg, Germany, which shipped its first solar generator to Mali in December last year. Cont'd...
Missouri is about to experiment with power from an unlikely source - its roads
BRYAN CLARK for TheNextWeb: Part of its ‘Road to Tomorrow Initiative,’ Missouri’s Department of Transportation is teaming with Solar Roadways, an Idaho-based startup (seriously, what’s going on in Idaho?) to cover an undetermined length of Historic Route 66 with road-ready solar panels.
Blair also told The Star that the bulk of its efforts will be crowdfunded. After receiving a $100,000 grant from the Federal Highway Administration to build a prototype, and a pair of $750,000 research grants from the US Department of Transportation, the group has raised more than $2 million of its own to complete the project through acrowdfunding campaign on Indiegogo.
Solar Roadways’ panels are tempered safety glass that are as strong as they are efficient. In addition to harnessing energy from the sun, they also come with LED lighting to effectively replace road lines and signage. While obviously more expensive to install upfront, the panels do have the benefit of being completely modular, which would allow for quick and cheap repairs by just swapping out the broken panels rather than re-paving entire stretches of road. Cont'd...
24M's Batteries Could Better Harness Wind and Solar Power
Elizabeth Woyke for MIT Technology Review: Lithium-ion batteries power everything from smartphones to electric vehicles. They’re well suited to the job because they are smaller and lighter, charge faster, and last longer than other batteries. But they are also complex and thus costly to make, which has stymied mass adoption of electric transportation and large-scale energy storage.
Yet-Ming Chiang thinks his startup 24M has the answer. The key is a semisolid electrode. In a conventional lithium--ion battery, many thin layers of electrodes are stacked or rolled together to produce a cell. “Lithium-ion batteries are the only product I know of besides baklava where you stack so many thin layers to build up volume,” says Chiang, who is a cofounder and chief scientist at 24M as well as a professor of materials science at MIT. “Our goal is to make a lithium-ion battery through the simplest process possible.” Cont'd...
New Solar Cell Device Surpasses Theoretically Predicted Efficiency Limit
Thomas Burton for Energy Technology Matters: A team of researchers at the Massachusetts Institute of Technology (MIT) published a paper last week in the journal Nature Energy that described how they built a working solar thermophotovoltaic device (STPV) that enables solar cells to break through a theoretically predicted ceiling on how much sunlight they can convert into electricity. With this revolutionary new technology, the researchers show the potential of how solar panels can generate even more energy than theoretically determined by harnessing some of the panels’ waste. To learn more about the STPV technology, read on!
Since 1961, the Shockley-Queisser Limit established an absolute theoretical limit on traditional solar cell efficiency regarding energy conversion. A single-layer of silicon cells—the type of cells most widely used in today’s solar panels—has an upper limit of 32 percent. But currently, researchers are studying ways to increase this overall efficiency by using multiple layers of cells or converting the sunlight first to heat before generating electrical power. This latter method uses devices called STPVs, which the MIT team used in their study. Cont'd...
Futuristic device is helping scientists break solar-efficiency record
Ariel Bogle for Yahoo News: Looking a little like the world-saving stones from sci-fi classic The Fifth Element, a new device is expected to have a big impact on renewable energy.
Built by Mark Keevers and Martin Green from the University of New South Wales (UNSW), the unique prism could help make solar panels cheaper and more efficient. In fact, it's already broken a world record for the amount of solar energy it can create from unfocused sunlight.
The prism has a sunlight-to-electricity conversion efficiency rate of 34.5 percent, Keevers told Mashable Australia. That's about a 44 percent improvement in efficiency on the previous record, he said, which sat at 24 percent efficiency but over 800 square centimetres (124 square inches). The UNSW team's record was achieved over a smaller surface area of 28 square centimetres (4.34 square inches).
Importantly, it does this with normal, un-concentrated light — the type household solar panels already use. Cont'd...
Solar cells of the future could be based on iron molecules
Researchers at Lund University in Sweden have successfully explained how iron-based dyes work on a molecular level in solar cells. The new findings will accelerate the development of inexpensive and environmentally friendly solar cells. The goal is to be able to use iron-based dyes in solar cells in the future.
Solar Cell "Wonder Material"-Perovskite-Falls Short of Expectations
Hugh Cowley for Scientific American: Perovskites have arguably transformed solar energy more in the last few years than other technologies have in decades. But British researchers have called into question optimistic predictions of undiscovered perovskites.
Hybrid perovskites are a mix of organic and inorganic ions with the same crystal structure as calcium titanium oxide (CaTiO3). Halide perovskites are a subset of these structures containing halide ions such as fluoride or chloride. Iodide perovskites such as methylammonium lead iodide (CH3NH3PbI3) can convert sunlight to electricity.
Researchers use a decades-old geometric 'tolerance factor' to propose new combinations of ions that will form stable perovskites. Now, Robert Palgrave and his team at University College London, UK, have reassessed the validity of the tolerance factor in predicting new hybrid perovskite structures. Cont'd...
Permanent Magnet Technology: The Wind Industry's New Drive Train Standard
As PMG+FPC drive trains outperform DFIGs from both a full-cycle cost-efficiency and reliability perspective, the turbine manufacturing industry needs to revise some of its old assumptions and obsolete turbine technology choices to embrace the generator technology that leads to better AEP.
Apple leftovers key for future energy storage
By Tereza Pultarova for E&T: German researchers have developed a new carbon-based active material that can be manufactured from apple leftovers and used to build better energy storage systems.
The apple-based material can be used as the negative electrode in sodium-ion batteries, which are currently being researched as a more environmentally friendly and cheaper alternative to lithium-ion batteries.
Instead of energy-intensive lithium mining, which frequently damages the environment, battery manufacturers in future could be using organic waste to make batteries.
In tests, the new material discovered by researchers from the Helmholtz Institute Ulm of Karlsruhe Institute of Technology, has demonstrated ‘excellent electrochemical properties’, allowing the researchers to carry out 1000 charge and discharge cycles during which the apple-based battery demonstrated high stability as well as capacity. Cont'd...
These Creative Wind Turbines Will Have You Rethinking What You Know About Wind Power
By Alison Gillespie for SMITHSONIAN.COM: Although a lot of people are excited about wind energy, few are excited about the pinwheel-shaped machines that often produce it. Branded as noisy, blamed for spoiling bucolic views and proven deadly to some bats and migrating birds, the giant, white-bladed horizontal axis wind turbines that now dot the landscape of the American West have earned a fair number of detractors—even among environmentalists who generally favor renewable power.
But what if you turned the idea sideways, and created a turbine that could spin like a carousel? And what if you made a turbine small enough to sit on top of a building or inside an urban park? Could the result produce enough power to really matter?
The idea isn’t a new one—people have been playing with windmill designs and experimenting with alternatives to the horizontal axis turbine for almost a century now. But in the last two decades, a flurry of interest in expanding renewable energy in cities has attracted the attention of a large number of inventors and artists, many of whom see the vertical axis wind turbine as promising.
There is no single design for these upended wind catchers, but all share one key aspect: the blades turn around an axis that points skyward. And unlike their horizontal brethren, the components and associated generators of a vertical turbine are placed at its base, giving it a lower center of gravity. Most are also relatively small, and unlike horizontal units, they can be grouped very closely together to optimize efficiency. Cont'd...
Records 181 to 195 of 317
First | Previous | Next | Last
Featured Product
S-5!® PVKIT™ 2.0 Solar Rooftop Solutions
The concept of combining PV arrays with standing seam metal roofing is growing-for good reasons. Metal roofs have a life expectancy of more than 40 years. Shouldn't the mounting system last as long? With S-5! zero-penetration attachment technology and PVKIT 2.0, the solarized metal roof is the most sustainable system available -and without compromising roof warranties! PVKIT 2.0 is the also the best solution for attaching PV modules directly to any exposed fastener metal roof.
